How to Maintain and Maintain Reducer Correctly by Reducer Manufacturers

In the normal use of the decelerator for one to two months, the decelerator should be maintained once. Replace the lubricant inside, check the base screw of the decelerator, whether the connecting screw is loose, and reinforce it loosely. Special attention should be paid to check whether the side cover of the reducer is loose or not. If the loose is serious, careful examination must be done. It's better to open the small square cover of the reducer and use a thumb-thick iron stick to forcefully pry the gears inside. If you find the phenomenon of tandem axles, if you can't solve it yourself, contact our manufacturers in time, now solve the problem of tandem axles. The problem is not very difficult, if this series of axle problems can not be solved in time, the consequences are very serious, followed by broken teeth or axle, reducer is most afraid of the series axle. It is hoped that the vast number of users should be regularly and regularly maintained and maintained. The above checks should be done for each maintenance and maintenance. There will be wear and tear when the reducer runs for a long time, and there will be different degrees of clearance when the wear is large. Therefore, it is necessary to adjust the clearance in time and restore the normal clearance, and the clearance will be in series when the clearance is large. If the maintenance and maintenance are well done, the life of the reducer will become longer.