The reducer manufacturer tells you how to maintain and use it by yourself

There is no lubricating oil in the reducer when it leaves the factory. Users must stipulate that lubricating oil should be added before using, and the operation should be carried out in accordance with the manufacturer's instructions. Generally speaking, the gear reducer has a running-in period of about 200 hours (lubricating oil must be replaced for more than 200 hours), which is stipulated by the technical characteristics of the gear reducer in the initial stage of its use in Driving Machinery. Running-in period …

From：Jiangsu Taiyang reducer Co., Ltd. [ 2019/10/12 ]

Taiyang reducer manufacturer in China has developed a new type of miniature reducer by itself.

With the development of the industrial market and the demand of the present market, the existing reducer can not meet the demand of the present market. In the past, many of them were mainly staffs. Now they are slowly transforming into machines. The miniature reducer is indispensable. The existing miniature reducer can not satisfy the demand of the present market. Various kinds of gestures of machines conceive strange miniature reducers. Speed reducer, its technical difficulty is no less than large reducer. Althoug…

From：Jiangsu Taiyang reducer Co., Ltd. [ 2019/10/12 ]

How to Maintain and Maintain Reducer Correctly by Reducer Manufacturers

In the normal use of the decelerator for one to two months, the decelerator should be maintained once. Replace the lubricant inside, check the base screw of the decelerator, whether the connecting screw is loose, and reinforce it loosely. Special attention should be paid to check whether the side cover of the reducer is loose or not. If the loose is serious, careful examination must be done. It's better to open the small square cover of the reducer and use a thumb-thick iron stick to forcefully pry the gears inside…

From：Jiangsu Taiyang reducer Co., Ltd. [ 2019/10/12 ]

How to form and deal with the abnormal sound of reducer in gear box manufacturer.

The noise generated by long-term use of reducer is normal in practice. I hope that these problems can be prevented from further damage as long as the user handles them by himself. Of course, it depends on what kind of reducer is and what type of bearings are used. Here we can only say what are the normal problems. The greatest wear of the reducer under normal high-speed operation is the bearing of the reducer. There will be different degrees of wear and tear in the long operation of the bearing, and there will be c…

From：Jiangsu Taiyang reducer Co., Ltd. [ 2019/10/12 ]

Chinese reducer manufacturers introduce how to assemble axles and gears correctly

There is a need to pass through the assembly process of reducer is how to properly bake and assemble the shaft and gear. In real life, there are usually four heating methods. The first is coal combustion heating, the second is oxygen combustion heating, the third is electric heater heating, and the fourth is oil boiling heating. Here the reducer manufacturer calls you how to correct heating method. The first and second heating methods are incorrect, because the first and second heating methods are local heating. Wh…

From：Jiangsu Taiyang reducer Co., Ltd. [ 2019/10/12 ]